Xantech Micro Link Kit

RRP £245.00 - Our Price - £239.79 inc. 15% VAT

RRP £245.00

Save 2%

Xantech Micro Link Kit

Another miniature IR receiver that features surface mount technology. The 490 has its electronics housed in a brass cylinder. The “business end” of the unit is a small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. A single, 1/2-inch hole will accommodate the 490. The high sensitivity of this receiver gives you the ability to place the 490 further away from the hand held remote, increasing the placement options you have.

Features:
• Extremely small package, only 2 inches deep.
• Works in normal 3-wire mode.
• Talkback green LED tests system for correct wiring as well as indicating infrared reception.
• RF Grid included for EMI interference reduction.
• SUN490 Sunscreen filters available separately. Order these to help with sunlight and stray IR problems. They fit easily under the bezel.

490-00 - Standard version, with mini 3-conductor 7 ft. ribbon cable and separate screw terminal block (supplied).

490-KIT - MICRO LINKTM KIT - Prepackaged kit includes:
1 x 490-30 Micro Link Receiver (brass bezel)
1 x CB60 Connecting Block
1 x 781RG Power Supply
4 x 283M Blink IR Mouse Emitters

Specifications:
• Infrared modulation frequency bandwidth: 30 - 100 kHz.
• Nominal reception range: > 30 feet.
• Nominal reception angle: 55 degrees off axis.
• Cable requirements for long lengths: three-conductor/24 gauge up to 200', 22 gauge up to 600', 20 gauge up to 2000' and 18 gauge up to 5000' (unshielded OK).
• Maximum cable length: One mile with 18 gauge.
• Maximum current output: 100 milliamps.
• Maximum number of directly driven IR emitters: Up to four connected in series. (Use Xantech Connecting Blocks for emitter expansion).
• Power requirements: 12 volts DC @ 10 mA.
• Requires 781RG Power Supply.
• Dimensions: 1/2 (13mm) diameter, 2 (51mm) deep.