Xantech PLASMA Micro Link Kit

RRP £379.99 - Our Price - £341.99 inc. 17.5% VAT RRP £379.99 Save 10% Email a Friend	Enlarge this image More Remote Senders More Xantech products More Xantech Remote Senders

Xantech Plasma Micro Link Kit

This product is exactly the same as the CRT Micro Link Kit but rejects interference from plasma displays, direct sunlight and fluorescent tube lights for accurate IR signal reception. A must if to be placed in close proximity to an afore mentioned screen.

Features:

Small size - only (51mm)deep
Quick connect 3.5mm stereo mini-plug on 7 foot cable (2.1mm) for direct connection to Xantech connecting blocks
Works in normal three-wire mode
RF grid included for RMI interference reduction
Patent pending

Prepackaged Plasma Kit Contains

1 x 490-95D Micro Link Plasma Proof IR Receiver (Brass, Black or White Bezel)
1 x 789-44 Connecting Block 1 Zone, 4 Outputs.
1 x 781ERGPS Power Supply, (up to seven 490-95's may be powered on the same power supply)
2 x 284D Blink IR Dual Emitters (4 IR Devices)

Specifications:

Infrared modulation frequency bandwidth: 30 - 100 kHz.
Nominal reception range: > 50 feet.
Nominal reception angle: 55 degrees off axis.
Cable requirements for long lengths: three-conductor/24 gauge up to 200', 22 gauge up to 600', 20 gauge up to 2000' and 18 gauge up to 5000' (unshielded OK).
Maximum cable length: One mile with 18 gauge.
Maximum current output: 100 milliamps.
Maximum number of directly driven IR emitters: Up to four connected in series. (Use Xantech Connecting Blocks for emitter expansion).
Power requirements: 12 volts DC @ 10 mA.
Requires 781ERGPS Power Supply.
Dimensions: 1/2 (13mm) diameter, 2 (51mm) deep.